The application of 6060/6063 alloy (EN AW 6060/6063, AlMgSi/AlMg0.7Si) in the state of T5/T6. 6060 alloy composition: 0.30~0.60Si, 0.10~0.30Fe, 0.10Cu, 0.35~0.60Mg, 0.05Cr, 0.15Zn, 0.10 Ti, other impurities 0.05, 0.15, the rest Al, developed by the European Aeronautics and Astronautics Association, and registered in Alcoa in 1972. 6063 alloy components: 0.20~0.6 Si, 0.10~0.35Fe 0.10, Cu, 0.10Mn, 0.45~0.9Mg, 0.10Cr, 0.10Zn, Ti 0.10 and other impurities each 0.05, a total of 0.15, the rest is Al; 1945 to finalize the design, by the Alcoa Corp research and development, is currently the largest output single deformation Aluminum Alloy, mainly used for extrusion of aluminum construction, the building is 92% aluminum extrusion the above alloy production.
The two alloys are characterized by excellent formability, solderability, corrosion resistance, suitable for electrochemical polishing and anodizing, and used for making highly decorative forgings.
Specification of 6060/6063 aluminum alloy forgings
Alloy: 6060, 6063
Available Temper: H112、O、F、T3、T4、T5、T6、T7、T8、T9、T651、T851、T451、T351
Maximum single unit weight: 800kg
Maximum diameter with quenching:2000mm
Maximum diameter without quenching: 2800mm